Strutfit
JACK – Multistage truck jack 80/50 ton Part No.: LHTJM8050 Code No. 1
JACK – Multistage truck jack 80/50 ton Part No.: LHTJM8050 Code No. 1
Couldn't load pickup availability
JACK – Multistage truck jack 80/50 ton Part No.: LHTJM8050
Code No.: 1
Part No.: LHTJM8050
Shipping weight & size : 126kgs SKID 147x60x49
Description :
FEATURES
Air activated Jack 2 Stage 80,000 / 50,000 kgs
This product is designed for heavy duty truck, trailer workshop shop use, rail and bus work and even for roadside service calls.
The narrow chassis design fits easily between tandem wheels, while the chassis base is contoured so wheels make contact with the ground when the jack is not under load.
Wheels are raised off the ground when under load to prevent damage.
The overload and bypass safety valves prevent the jack from being used beyond its rated capacity and ram over-extensions. The jack has a self-retracting ram, as well as an integrated filter to protect the air motor.
Super Heavy Duty, 2 stage 80 tonne and 50 tonne built tough for the rigors of heavy-duty trucking, agricultural and fleet business.
The piston head seal designed is borrowed from industrial technology providing a superior low and high-pressure seal, giving this jack a much better hold under severe load conditions.
The extra-long 138 cm handle can be locked in 3 positions for easy positioning of this jack in hard-to-reach places.
An integral Descent Metering Valve maintains a controlled and safe lowering of the load.
Single piece base construction provides superior strength for increased load stability. Double polished chromed pistons allow for much tighter tolerances which reduce oil bypassing and reduced ram scoring.
Air assisted lowering speeds up ram retraction. Built-in overload safety valve prevents damage to unit due to excessive load. Comes with 2 extensions (75 mm & 45 mm) and saddle adaptor.
Units are tested to -25° C and +45° C as well as off centre loading to ensure a long life under even the hardest conditions.
SPECIFICATIONS :
- Brand: Millers Falls
- Model: LHTJM8050
- Lifting capacity (first stage): 80000kg
- Lifting capacity (second stage): 50000kg
- 50T Hydraulic lift (first stage): 111mm
- 25T Hydraulic lift (second stage): 102mm
- Minimum height: 230mm
- Maximum height: 565mm
- Operation: Air/hydraulic
- Operating Air Pressure: 0.9-1.2mPA (145-175psi)
- Handle length: 1380mm
- Chassis: 930mm x 340mm x 230mm
- Construction: High grade steel made to meet Australian standards
- Finish: Industrial powder coated
- Designed for industrial /commercial use
- Adaptors: 75mm and 45mm
- Net Weight: 106kg
- Package Size: 98cm x 39cm x 28cm (excluding handle)
- Handle Box:139cm x 28cm x 11cm
- Gross weight: 115kg
- Warranty: 12 months
- Colour may vary
NOTE Always follow Jack Safety Lifting Instructions
Share




