STRUTFIT
HOIST – 4 Post Hoist – 4 Ton extra long & high Part No.: S4PH4TONXXL Code 3
HOIST – 4 Post Hoist – 4 Ton extra long & high Part No.: S4PH4TONXXL Code 3
Couldn't load pickup availability
HOIST – 4 Post Hoist – 4 Ton extra long & high Part No.: S4PH4TONXXL Code No. 3
Code No.: 3
Part No.: S4PH4TONXXL
Shipping weight & size : 930 Kgs & 526*71*56 cm
Description :
PLEASE NOTE: THIS ITEM IS LOCATED AT OUR WERRIBEE WAREHOUSE AND IS AVAILABLE FOR PICKUP THERE ALTERNATIVELY IT CAN BE DELIVERED AT AN ADDITIONAL COST
INSTALLATION IS ALSO AVAILABLE AT AN ADDITIONAL COST.
This extra long and high 4 Post Hoist is ideal for working on large vehicles and increasing the parking space in your shed. It is significantly larger than our 4 Ton Standard 3 Post Hoist whilst maintaining the same width.
4 Post Hoist Features
- 4000kg/ 4 ton safe load limit
- Lifting height of 2.2m
- A single hydraulic cylinder lifts the runways by pulling the cables
- Runways can be adjusted between two track settings by removing 4 bolts and sliding one over
- Keep your car off the ground away from being dented, scratched and touched
- Durable powder coated finish
Safety Features
- 4 point pneumatic safety lock releases
- Additional secondary safety lock when weight comes off the cables
- Runways must first be raised a fraction before the safety locks will operate to allow the car hoist to be lowered
- Heavy duty 6mm thick cross beams and 5mm thick runways
- 10mm steel wire rope equalising cables
- Anti-surge valve in the hydraulic power unit
What’s Included?
- 4 post hoist with all bolts, cables, lines and fixings
- 240V single phase hydraulic power unit
- Concrete anchor bolts
- Detailed installation instructions
What’s Not Included?
- Hydraulic oil
- Setup of power units electrical connection
- Compressed air supply
Optional Accessories
- A rolling Secondary Lift is the easiest way to jack up cars on the hoist
- An Optional Jacking Plate can be used as an extra support point under the vehicle
- Caster Wheels allow you to move the 4 Post Hoist around your workshop with ease
- Need to do wheel alignments? We offer a Wheel Alignment Kit as an add-on
- Storing cars above and below? Be sure to use our Oil Drip Trays to keep them safe
Shed Requirements
- 125mm deep concrete at 32mpa
- Minimum ceiling height of 3.9m
Warranty & Certifications
- 3 year Australian warranty* includes structure, hydraulics & electrics
- Australian WorkSafe registered design
- CE certification
MOTOR SPECS |
240V 20A SINGLE PHASE |
CLEARANCE BETWEEN POSTS |
2715MM |
MAX TABLE HEIGHT |
2265MM |
POST HEIGHT |
2600MM |
OVERALL WIDTH INCLUDING PUMP |
3300MM |
OVERALL LENGTH NOT INCLUDING RAMPS WHEN DOWN |
5310MM |
OVERALL LENGTH INCLUDING RAMPS WHEN DOWN |
6070MM |
TABLE LENGTH |
4960MM |
EACH TABLE WIDTH |
480MM |
N.W/ G.W |
910KGS/ 930KGS |
MINIMUM CONCRETE THICKNESS |
150MM |
· Material Thickness
CABLES |
10MM |
CROSS BEAMS |
6MM |
RUNWAYS |
5MM |
COLUMNS |
4MM |
· Freight Information
HOIST |
526CM |
71CM |
56CM |
TOTAL WEIGHT |
930KG |
Share







