STRUTFIT
CAR HOIST CLEAR FLOOR 5 TON 2 POST Part No.: CLEARFLOOR5T2CH Code No: 3
CAR HOIST CLEAR FLOOR 5 TON 2 POST Part No.: CLEARFLOOR5T2CH Code No: 3
Couldn't load pickup availability
CAR HOIST CLEAR FLOOR 5 TON 2 POST Part No.: CLEARFLOOR5T2CH Code No: 3
Code No.: 3
Part No.: CLEARFLOOR52TCH
Shipping weights & size : 950 kgs & 365*57*107 cm
PLEASE NOTE: THIS ITEM IS LOCATED AT OUR WERRIBEE WAREHOUSE AND IS AVAILABLE FOR PICKUP THERE ALTERNATIVELY IT CAN BE DELIVERED AT AN ADDITIONAL COST
INSTALLATION IS ALSO AVAILABLE AT AN ADDITIONAL COST.
This 2 Post Hoist is the next level! Purpose built to lift heavy commercial vehicles — It features taller columns, larger base plates and heavier arms than our 4.5 Ton Clear Floor 2 Post Hoist.
We recommend the medium width setting as we have found it to be the most versatile setup, allowing both large and small vehicles to be lifted with ease. The wide width setting is not recommended as most vehicles cannot be lifted using this setting.
Clear Floor Hoist Features
- 5000kg/ 5 ton safe load limit
- Lifting height of 1.9m (plus raising adapters)
- Dual hydraulic cylinders lift the carriages by direct hydraulic force
- Heavy duty lifting pads and 4 additional raising adapters are included
- 3 different drive through widths for the columns
- Durable powder coated finish
- Rubber door protectors
- Symmetric two and three stage arms
- No floor plate restrictions
Safety Features
- Manual safety locking system with safety latches in each column
- Single point release system
- Heavy duty 6mm thick columns & carriages
- 10mm steel wire rope equalising cables
- Anti-surge valve in the hydraulic power unit
What’s Included?
- 2 post hoist with all bolts, cables, lines and fixings
- 240V single phase hydraulic power unit
- Concrete anchor bolts
- Detailed installation instructions
What’s Not Included?
- Hydraulic oil
- Setup of power units electrical connection
Shed Requirements
- 125mm deep concrete at 32mpa
- Minimum ceiling height of 4.4m
Warranty & Certifications
- 3 year Australian warranty* includes structure, hydraulics & electrics
- Australian WorkSafe registered design
- CE certification
Specifications:
NOTE: The wide width setting is NOT RECOMMENDED as most vehicles cannot be lifted using this setting.
MINIMUM CONCRETE THICKNESS |
125MM 32MPA |
MOTOR |
240V 20A SINGLE PHASE |
LIFT CAPACITY |
5000KG |
OVERALL HEIGHT |
4275MM |
LIFTING RANGE |
1705MM |
MAX RISE FROM THE GROUND (NO EXTENSIONS) |
1815MM |
LOWEST CLEARANCE FROM THE GROUND (NO EXTENSIONS) |
110MM |
NARROW DRIVE THROUGH CLEARANCE |
2305MM |
NARROW WIDTH INSIDE COLUMNS |
2875MM |
MEDIUM DRIVE THROUGH CLEARANCE |
2455MM |
MEDIUM WIDTH INSIDE COLUMNS |
3025MM |
WIDE DRIVE THROUGH CLEARANCE |
2605MM |
WIDE WIDTH INSIDE COLUMNS |
3175MM |
FRONT ARM REACH |
492MM TO 1063MM |
REAR ARM REACH |
948MM TO 1529MM |
WIDTH ARMS OPEN SYMMETRIC SETTING |
3101MM |
WIDTH ARMS OPEN ASYMMETRIC SETTING |
2099MM |
WIDTH ARMS CENTERED |
875MM |
LIFTING TIME |
60 SECONDS |
Freight Information:
HOIST |
3605MM |
570MM |
1070MM |
TOTAL WEIGHT |
950KG |
Share











