CAR HOIST 4.5 TON WHEEL ALIGNMENT 4 POST PART NO. 4.5T49WHEELALIGNCH CODE 3
CAR HOIST 4.5 TON WHEEL ALIGNMENT 4 POST PART NO. 4.5T49WHEELALIGNCH CODE 3
Regular price
$6,299.00 AUD
Regular price
Sale price
$6,299.00 AUD
Unit price
/
per
CAR HOIST 4.5 TON WHEEL ALIGNMENT 4 POST PART NO. 4.5T49WHEELALIGNCH CODE 3
Code No.: 3
PART NO. 4.5T49WHEELALIGNCH
Shipping weight & size : 1300 kgs & Hoist Box 1 - 1095 kgs & 453*56*120 cm & Pump - 205 kgs & 114*56*55cm
HOIST | 4530MM | 560MM | 1200MM |
PUMP | 1140MM | 560MM | 550MM |
Australia’s most affordable commercial Wheel Alignment Hoist! It features heavy duty flat runways with built in caster plates and slip plates. Plus the included secondary lift makes lifting and lowering vehicles an efficient task.
DESCRIPTION
- 4500kg/ 4.5 ton safe load limit
- Lifting height of 1.9m
- A single hydraulic cylinder lifts the runways by pulling the cables
- Flat runways with built in cut-outs for the included caster plates and slip plates
- The alignment kit is constructed with high strength steel balls to extend the service life
- Includes a pneumatic secondary lift as standard
- Durable powder coated finish
- 4 point pneumatic safety lock releases
- Additional secondary safety lock when weight comes off the cables
- Runways must first be raised a fraction before the safety locks will operate to allow the car hoist to be lowered
- Heavy duty 6mm thick cross beams and 5mm thick runways
- 10mm steel wire rope equalising cables
- Anti-surge valve in the hydraulic power unit
- Wheel alignment hoist with all bolts, cables, lines and fixings
- 240V single phase hydraulic power unit
- Concrete anchor bolts
- Detailed installation instructions
- 150mm deep concrete at 32mpa (shed requirements)
- Minimum ceiling height of 3.5m (shed requirements)
- 3 year Australian warranty* includes structure, hydraulics & electrics
- Australian WorkSafe registered design
- CE certification
- Hydraulic oil NOT INCLUDED
- Setup of power units electrical connection NOT INCLUDED
-
Optional Accessories
- An additional SECONDARY LIFT can be added to this hoist
- An OPTIONAL JACKING PLATE can be used as an extra support point under the vehicle
- Storing cars above and below? Be sure to use our OIL DRIP TRAYS to keep them safe
PLEASE NOTE: THIS ITEM IS LOCATED AT OUR WERRIBEE WAREHOUSE AND IS AVAILABLE FOR PICKUP THERE ALTERNATIVELY IT CAN BE DELIVERED AT AN ADDITIONAL COST
INSTALLATION IS ALSO AVAILABLE AT AN ADDITIONAL COST.
MOTOR SPECS | 240V 20A SINGLE PHASE/ OPTIONAL 415V THREE PHASE |
MINIMUM HEIGHT | 220MM |
MAX TABLE HEIGHT | 1950MM |
POST HEIGHT | 2170MM |
OVERALL WIDTH INC. PUMP | 3680MM |
OVERALL LENGTH INC. RAMPS WHEN DOWN | 5350MM |
TABLE LENGTH | 4400MM |
EACH TABLE WIDTH | 500MM |
N.W./ G.W | 1150KGS/ 1200KGS |
MINIMUM CONCRETE THICKNESS | 150MM |
Freight Information
HOIST | 4530MM | 560MM | 1200MM |
PUMP | 1140MM | 560MM | 550MM |
TOTAL WEIGHT | 1300KG |